Change a Propane Tank
Propane fueled forklifts are frequently used inside warehouses. The lift truck is designed with the propane tank mounted at the rear of the operator. The tanks, that look much like beer kegs, need to be replaced every so often because they have a limited lifespan. Drivers of forklifts should utilize caution when handling propane tanks. Compressed gases are hazardous, particularly since the gas is flammable. Utilize care when replacing and removing propane tank to prevent injury.
1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The forklift must be left on until the engine dies. This process burns off the gas inside the transfer hose which connects the engine and the tank. Before taking the second steps, put on the correct safety equipment, like insulated gloves made of either neoprene or leather. It is really essential for you to protect your skin from contact with the compressed gas, that is very cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 You could check for leaks by applying soapy water to the valve and opening it slightly. Leaking gas will cause bubbles to froth around the value. If this happens, check the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the valve area, and afterward perform the leak inspection process once more. Persistent leaks mean that the nut and connecting hose should be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. Afterward you could start the forklift and resume operating.