Propane Tank Rules
The gas container, LP System or liquefied petroleum system is a collective term by OSHA that refers to the regulators, piping, hoses, regulators, valves and fittings. Depending on the tank capacity, the agency needs particular parts. These individual components must undergo recognized laboratory testing. The correct laboratory approval would prove that the system components meet construction, pressure and thickness standards.
Tank Location
The OSHA is the organization who dictates how near the propane tank is situated to buildings, to ignitable materials, to tanks that contain inflammable liquids, welders and cutting torches. These stringent rules are implemented to make the jobsite really safe for the workers and other people who are in close proximity.
Nameplate Marks
LP systems require that the name, the address, the container supplier, and or the tanks trade name, be marked on the propane container. The capacity of the container is to be listed with the following information: pounds or gallons of fuel, square foot outside surface, fill level, and pressure. In addition, details about whether or not the container is made for installation underground or above ground is also visible. These markings need to be on a metal plate connected somewhere noticeable to the container. OSHA requires that each tank should be marked by the Pressure Vessel Inspectors and National Board of Boiler so as to be considered safe and ready to utilize.
Tank Repairs and Modifications
OSHA also regulates any type of repairs to the LP systems, such as welding. The personnel performing repairs and the tank owners must understand the standards and regulatory codes which the tanks were manufactured. Welding repairs to any component of the system which is subject to internal pressure must first follow these fabrication codes. Any other kind of welding is only allowed on saddle plates, lugs or brackets.
The OSHA works hard to make certain that people who work with forklifts and in their vicinity are kept safe. They have stringent regulations and training procedures in place in order to make sure that these industrial machinery and their repair processes are handled with respect and as safe as possible. It is very essential that companies follow their rules and steep fines can occur if they are not followed.